What are the basic requirements for sitting comfort?

The basic requirements are to have a workstation and job tasks designed to allow a person to remain in a  neutral posture, regardless of the work being done. The CSA Standard "CSA Z412-17 Office ergonomics – An application standard for workplace ergonomics" recommends that alternating between sitting and standing, or variations of sitting and standing postures (e.g., reclining, forward tilting, and semi-standing) are encouraged in order to avoid the negative effects of prolonged sitting or standing in one posture. CSA also states that there is no uniquely correct working posture that fits a user for an extended period of time.

This document covers working in a sitting position. Please see other OSH Answers, including Sit/Stand Desk, Working in a Sitting Position, and Working in a Standing Position, for more information.

A workstation should allow the worker to sit in a balanced body position. Use a workstation that:

Allows for the alignment of the spine whether the worker sits or stands.

Allows the worker to move the spine freely.

That can be adjusted to the needs of the worker.

A job's design should allow the worker to work in a variety of balanced positions.

Design tasks so they require movement of the spine and encourage the worker to alternate positions frequently.

Avoid an excessive range of movement by:

Providing all materials at the working level.

Positioning tasks within easy reach.

Avoiding lifting and transferring loads while sitting.

Avoid static positions.

Position visual tasks that maintain the vertical alignment of the head and spine.

Design the lighting system to:

Provide good general lighting.

Provide task lighting where necessary.

Avoid glare.

Gravity constantly exerts a downward force on our bodies. The parts of our body in contact with a supporting structure (the seat of chairs, armrests, floors, etc.) will feel pressure from the structure to balance this force. Parts of our bodies that are not in contact with a supporting structure will use muscles, tendons, and ligaments to balance the force of gravity with an upward force of their own.

The body position that has the highest strength to handle the pressure felt by the supporting structure, while causing the least amount of strain on the muscles, tendons, and ligaments, is called the neutral or balanced body position.

The following recommendations outline how to maintain a neutral body position while sitting:

Note: No one seating position can remain comfortable over a long period of time. For this reason, multiple positions in which the body can be in the neutral position are recommended. As mentioned above, the workstation should allow the worker to adjust and move between these positions.

Seated manual tasks should be designed to maintain vertical alignment of the spine, and avoid constant stress on the shoulder region. This alignment can be done by:

Providing materials at or slightly below elbow height.

Providing armrests where appropriate.

Providing tool balancers and avoiding heavy hand tools.

Avoiding tasks that require the shoulder or arms to be excessively high.

Avoiding tasks that require excessive reach. Place items according to importance and how often you will use them

Primary zone – immediate reach, for items needed most frequently or of highest importance.

Secondary zone – within arm’s reach, for items of lower importance or used occasionally.

Tertiary zone – area farthest away which requires you to bend forward to reach, for rarely used items.

Position foot tasks so that they can be done without twisting hips.

Design foot tasks to avoid movement and exertion by only one leg.

Provide the appropriate support for both working and non-working legs.

Design a sitting task that encourages the worker to alternate positions frequently.

Fact sheet last revised: 2024-07-31